10bit camera system WinCamD (CCD/USB2.0) A complete system consists of the camera head, a USB2.0 interface, connecting cable (3 m) and software. The camera is powered via the USB port, so there is no need for an additional power supply. The CCD version of the WinCamD product family is used mainly to measure small optical structures and spots of cw and pulsed lasers or other optical sources. Due to the high SNR is is also the best choise to measure the spatial distribution of very weak optical signals.

Highlights:

Wavelength range from 355 nm to 1150 nm.

Pulsed laser auto-trigger and synchronisation; TTL (In/Out)

Exposure time manual or automatic between 40 µs and 1024 ms

Variable active area on chip from 16x16 pixels

Field-replacable CCD chip

No external power supply needed

Features:

◊ USB 2.0 port-powered; flexible 3 m cable; no external power supply required.

◊ 1.12” thin to fit tight beam trains [including filter]

◊ Digital CMOS cameras with on-chip 10-bit ADC

◊ 4 MB image buffer & on-board microprocessor

◊ Window-free sensors standard for no fringing

◊ 25,000:1 electronic auto-shutter, 40 μs - 1000 s

◊ Pulsed laser auto-trigger and synchronization

◊ Parallel capture on multiple cameras

◊ Field-replaceable CMOS sensors Applications:

◊ CW & Pulsed laser profiling

◊ Field servicing of lasers and laser-based systems

◊ Optical assembly & instrument alignment

◊ Beam wander & logging

◊ M-Squared Measurements

PARAMETER: SPECIFICATION:

Sensor: 1/1.8" CCD, 1.9 MPix Pixel: 1600 x 1200 pixel, 4.4 x 4.4 µm each Active area: 7.0 x 5.3 mm Measurable sources: cw, 1 Hz - 20 kHz single pulse capture rate Trigger: auto-(optical), synchronous & variable delay, TTL-In/Out -UV : 10 - 355 nm (additional converter optic) Standard: 355 - 1150 nm -1310: 1290 - 1330 nm (residual responsivity, tested) -IR: 1480 - 1680 nm (direct Phosphoros coating) -IR-Adapter: 1480 - 1680 nm cw: 43.5 dB; Signal/RMS-Noise 20.000:1 Pulsed: 7.5 dB Smallest Beam diameter: ø 40 µm Updaterate: 1-2 Hz dependend on PC and selected area size PC-requirements: 1 GHz Pentium, XP Pro/VistaUSB2.0 interface

This camera gives a fantastic beam image, but has become surplus to requirements. Full working order with no obvious signs of wear or tear. Comes with: Instruction manual, camera, USB to connect to computer and a CD Rom. Cost almost £3000 new. For more information on Dataray and the WinCam series see http://www.dataray.com/

If you have any further questions, do not hesitate to ask us by sending a message.

Nightingale EOS

For more items, see our other Market Place Listings