The cDAQ-9172 is an eight-slot NI CompactDAQ chassis that can hold up to eight C Series I/O modules. This USB 2.0-compliant chassis operates on 11 to 30 VDC and includes an AC/DC power converter and a 1.8 m USB cable. The cDAQ-9172 has two 32-bit counter/timer chips built into the chassis. With a correlated digital I/O module installed in slot 5 or 6 of the chassis, you can access all the functionality of the counter/timer chip including event counting, pulse-wave generation or measurement, and quadrature encoders.

Many devices can measure temperature, voltage, or bridge-based sensors, but NI CompactDAQ can integrate all of these measurements and more into a single device that outputs all of the data via the same bus interface, such as USB. An NI CompactDAQ system can mix multiplexed voltage input signals, simultaneously sampled accelerometers, low-speed thermocouples, and TTL digital I/O all in the same four- or eight-slot chassis using the same driver, NI-DAQmx.

NI CompactDAQ makes programming easier because the same driver is used for all measurements. This solution saves space and simplifies service and support. Included in this set is the NI 9901 Mounting Kit which enables the cDAQ to stand in place with screws to tighten the legs.

This is another fantastic offer at a very cheap price, which cost altogether almost £1000 new. It is surplus to requirements and is a fantastic piece of equipment. Comes with CD-Rom, mounting kit, cDAQ 8 slot chassis, powerpack and 3 pieces of literature. No obvious wear or tear, although 3 coverings for 3 of the 8 slots have been lost. For more information see http://sine.ni.com/nips/cds/view/p/lang/en/nid/202545

For further questions, feel free to ask,

Nightingale EOS

For more items, see our other Market Place Listings